Ultra

Stainless steels for extremely corrosive environments

Browse Ultra range specifications Visit Stainless Steel Finder

The Ultra range is best choice for wet corrosion challenges of your application. It contains stainless steel products for extremely corrosive environments.

More forms to choose from

We offer nickel-based alloy Ultra Alloy 825 as sheet, quarto plate, wire rod and welding strip, and as hot and cold rolled coils up to a width of 1,500 mm.

Read more about our Alloy 825 and download white paper

Subscribe for the latest product news

Find your nearest location

Ultra Alloy 654 SMO

 

Ultra

The Ultra range includes highly alloyed austenitic grades that are designed for extremely corrosive environments with PRE of more than 27.

The Ultra range includes our key products Ultra Alloy 825 (EN 2.4858), Ultra 904L (EN 1.4539) and Ultra 254 SMO (EN 1.4547) as well as several alternatives, for example Ultra 654 SMO (EN 1.4652) , the most corrosion-resistant stainless steel in the world, for your most specific applications.

The Ultra range is the best choice when you need material for extremely corrosive environments where standard grades like Core 304L/4307 or Supra 316L/4404 are not sufficient for the corrosion challenges of your application. 

The Ultra range stainless steels are not just excellent in corrosion resistance, but the strength and elongation properties of the Ultra range are similar or better in comparison with conventional austenitic stainless steels. The addition of nitrogen to Ultra grades such as Ultra 254 SMO gives them higher yield and tensile strength. Despite the greater strength of these steels, they offer very good possibilities for cold as well as hot forming. Ultra range steels are well suited for welding, and the methods used for welding conventional austenitic steels can also be used on these products.

Typical applications for Ultra range grades are:

  • chemical and petrochemical industry
  • maritime exhaust gas cleaning
  • heat exchangers
  • applications requiring resistance for chlorinated seawater.

Ultra Alloy 825 is a Ti-stabilized austenitic nickel base alloy used in the oil and gas industry in piping systems, petroleum refinery equipment and sour gas service systems. Ultra 904L is used in petrochemical industry equipment such as pipes, heat exchangers, tanks, and reactor vessels. Ultra 254 SMO is for applications requiring resistance to chlorinated seawater, flue gas cleaning, maritime exhaust gas cleaning as well as bleaching equipment in the pulp and paper industry and flanges and valves.

Ultra range grades can be used in a wide range of applications supported with a broad selection of surface finishes from mills and service centers.

See the full list of Ultra grades below

Outokumpu Ultra grades

Ultra 904L stainless steel

Ultra 904L is a high-nickel and molybdenum austenitic stainless steel with very high corrosion resistance. It was originally developed for handling sulfuric acid at ambient temperatures, and is now used in a broad range of chemical industry applications.

EN 1.4539

ASTM type 904L

ASTM UNS NO8904

Microstructure Austenitic

Typical applications

  • Chemical and petrochemical industry equipment such as pipes, heat exchangers, tanks, and reactor vessels
  • Sulfuric acid handling
  • Flanges and valves

Datasheet

Download Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.01

Cr 19.8

Ni 24.2

Mo 4.3

N -

Others 1.4Cu

Please remove item from comparison before you can add another one

Ultra 254 SMO stainless steel

A 6 % molybdenum and nitrogen-alloyed austenitic stainless steel with extremely high resistance to both uniform and localized corrosion. This product was developed especially for oil and gas offshore platforms and the pulp and paper industry.

EN 1.4547

ASTM type -

ASTM UNS S31254

Microstructure Austenitic

Typical applications

  • Applications requiring resistance to chlorinated seawater
  • Flue gas cleaning
  • Maritime exhaust gas cleaning (EGC)
  • Bleaching equipment in the pulp and paper industry
  • Flanges and valves

Datasheet

Download Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.01

Cr 20.0

Ni 18.0

Mo 6.1

N 0.20

Others Cu

Please remove item from comparison before you can add another one

Ultra 317L stainless steel

Ultra 317L is a molybdenum-alloyed austenitic stainless steel with higher corrosion resistance than Supra 316L/4404 – mainly used in the USA and Asia.

EN 1.4438

ASTM type

317L

 

ASTM UNS S31703

Microstructure Austenitic

Typical applications

  • Chemical processing industry

Data sheet

Dowload Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.02

Cr 18.2

Ni 13.7

Mo 3.1

N -

Others -

Please remove item from comparison before you can add another one

Ultra 725LN stainless steel

Ultra 725LN is a type 310 material (high chrome and high nickel) that has been developed and optimized specifically for urea production, which demand extremely high corrosion resistance. It has similar general pitting resistance to Ultra 904L.

EN 1.4466

ASTM type -

ASTM UNS S31050

Microstructure Austenitic

Typical applications

  •  Urea applications

Product forms

Datasheet

Download Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.01

Cr 25.0

Ni 22.3

Mo 2.1

N 0.12

Others -

Please remove item from comparison before you can add another one

Ultra 6XN stainless steel

Ultra 6XN is a 6 % molybdenum, high-nickel and nitrogen-alloyed austenitic product with extremely high resistance to both uniform and localized corrosion.

EN 1.4529

ASTM type -

ASTM UNS N08926/N08367

Microstructure Austenitic

Typical applications

  • Applications requiring resistance to chlorinated seawater
  • Flue gas cleaning

Datasheet

Download Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.01

Cr 20.5

Ni 24.8

Mo 6.5

N 0.20

Others Cu

Please remove item from comparison before you can add another one

Ultra 654 SMO stainless steel

Ultra 654 SMO is the most corrosion-resistant stainless steel in the world. A 7 % molybdenum, very high nitrogen alloyed austenitic product with high mechanical strength. A potentially lean alternative to traditional wet-corrosion resistant nickel-based alloys.

EN 1.4652

ASTM type -

ASTM UNS S32654

Microstructure Austenitic

Typical applications

  • Pressurized and erosive systems handling chlorinated seawater at higher temperatures
  • Plate heat exchangers
  • Flue gas cleaning applications

Typical chemical composition, % by mass

C 0.01

Cr 24.0

Ni 22.0

Mo 7.3

N 0.50

Others 3.5Mn Cu

Please remove item from comparison before you can add another one

Ultra 3964 stainless steel

Non-magnetic, high strength austenitic stainless steel with excellent corrosion resistance

EN WL 1.3964

ASTM type -

ASTM UNS -

Microstructure -

Typical applications

  • Marine application

Chemical composition, % by mass

C 0.02

Cr 20.4

Ni 15.4

Mo 3.3

N 0.26

Others Mn

Please remove item from comparison before you can add another one

Ultra Alloy 825 nickel base alloy

Outokumpu Ultra Alloy 825 is a titanium stabilized austenitic nickel base alloy with an addition of copper.

W.-Nr. 2.4858

UNS N08825

ISO NW8825/ NiFe30Cr21Mo3

Microstructure Austenitic

Typical applications

  • Components in sour gas service
  • Offshore oil and gas piping systems
  • Equipment in petroleum refineries
  • Heating coils
  • Heat exchangers
  • Tanks
  • Scrubbers
  • Chemical processing equipment
  • Food process equipment
  • Nuclear industry equipment

Data sheet

Download Ultra Alloy 825 datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.01

Cr 23.0

Ni 39.5

Mo 3.2

Cu 1.7

Others Ti 0.75, Mn 0.8, Si 0.35, Al 0.1, Fe bal.

Please remove item from comparison before you can add another one

Go directly to Outokumpu Ultra grades

Standards and approvals for Ultra range

 EN 10028-7   Flat products for pressure purposes – Stainless steels
 EN 10088-2  Stainless steels – Corrosion resisting sheet/ plate/strip for general and construction purposes
 EN 10088-3  Stainless steels – Corrosion resisting semi-finished products/bars/rods/wire/sections for general and construction purposes
 EN 10088-4   Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes 
 EN 10088-5  Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resistant steels for construction purposes
 EN 10272  Stainless steel bars for pressure purposes 
 EN 10283  Corrosion resistant steel castings

 The most commonly used international product standards are given in the table above. For a full list of standards by product, see steelfinder.outokumpu.com   

 ASTM A 193 / ASME SA-193   Alloy and stainless steel bolts and nuts for high pressure and high temperature service 
 ASTM A 240 / ASME SA-240  Cr and Cr-Ni stainless steel plate/sheet/strip for pressure purposes
 ASTM A 276  Stainless and heat-resisting steel bars/shapes
 ASTM A 312 / ASME SA-312  Seamless and welded austenitic stainless steel pipe
 ASTM A 351 / ASME SA-351  Steel castings, austenitic, duplex for pressure containing parts
 ASTM A 358 / ASME SA-358  Electric fusion-welded austenitic Cr-Ni alloy steel pipe for high temperature 
 ASTM A 409 / ASME SA-409  Welded large diameter austenitic pipe for corrosive or high-temperature service
 ASTM A 473  Stainless steel forgings for general use 
 ASTM A 479 / ASME SA-479  Stainless steel bars for boilers and other pressure vessels
 ASTM A 743  Castings, Fe-Cr-Ni, corrosion resistant for general application
 ASTM A 744  Castings, Fe-Cr-Ni, corrosion resistant for severe service
 ASTM B 649 / ASME SB-649   Bar and wire

 The most commonly used international product standards are given in the table above. For a full list of standards by product, see steelfinder.outokumpu.com  

 NACE MR0175    Sulfide stress cracking resistant material for oil field equipment 
 Norsok M-CR-630  Material data sheets for 6Mo stainless steel
 VdTÜV WB 473  Austenitischer Stahl X 1 CrNiMoCuN 20 18 7 Werkstoff-Nr. 1.4547
 VdTÜV WB 537  Stickstofflegierter austenitischer Stahl X2CrNiMnMoN 25-18-6-5 Werkstoff-Nr 1.4565

 The most commonly used international product standards are given in the table above. For a full list of standards by product, see steelfinder.outokumpu.com

 

  • AD 2000 Merkblatt
  • Approval of Material Manufacturers
  • Factory Production Control Certificate
  • ISO 9001
  • ISO 14001
  • ISO 50001
  • ISO/TS 16949
  • NORSOK
  • OHSAS 18001
  • Pressure Equipment Directive (PED) 

For the list of certificates and approvals by mill, see outokumpu.com/certificates

Cases

Case Sodertalje bridge

Bridging the way to a more sustainable and economical future

Article

Stainless steel stacks up for fuel cell bipolar plates

Article

Six key facts about stainless steel in commercial kitchens

Case DA Christie barbeques

Stainless steel central to the success of Australian public barbecues

Case Metalis waste bins

Rotterdam wastes no opportunity for sustainability

Case Temoco

Adding a sustainable touch to the Nordic’s leading bars

Case Imminkhuizen Metaaltechniek

Faster, more automated production is the future

Case Astava Instrumentation Solutions

High machinability delivers competitive edge

Case Rotoko machining operations

Where high machinability and superior quality meet

Interested in the world of stainless steel? 

Keep up to date with our monthly newsletter providing you with the latest news, articles, webinars and insights.

Subscribe