Hot rolled coil, strip and plate

The perfect start

Hot rolled coils, strips and plates are available in a wide range of heat and corrosion resistant grades in all stainless steel types: austenitic, ferritic, duplex, and martensitic. The resulting material is highly workable and 100% recyclable.


Value to our customers

Contact us to get more information about our products

Find your nearest location

Subscribe for the latest product news

Benefits

Why hot rolled coil, strip and plate

  • Extensive width and thickness selection.
  • Available in 1/1D surface finish. Outokumpu also offers semi-cold rolled RAP®2E (1/2E) surface finish.
  • Available in austenitic, ferritic, duplex and martensitic grades.

Ultra Alloy 825 campaign banner

Targeted properties for a tailored approach

Offering exceptional versatility, our hot rolled coil, strip and plate are used in virtually all industries and markets. In addition to plates, we produce quarto plate that is available in thicknesses up to 130 mm. Hot rolled coils, strips and plates are available in a wide range of heat- and corrosion-resistant grades in all stainless steel types: austenitic, ferritic, duplex and martensitic. The resulting material is highly workable and 100% recyclable.

Expertise in production

We are one of the few stainless steel producers that can provide sheet and plate in widths up to two meters (72”). We offer standard widths (1,000, 1,250 and 1,500 mm) in a large range of thicknesses and grades, and the widest available thickness range (from 2.4 mm up to 12.7 mm). Tailored dimensions are available by request.

Dedicated to consistent quality, we produce hot rolled plate products with low residual stresses. An advanced leveling process provides superior flatness for various applications.

Our hot rolled products available in 1/1D surface finish. They are hot rolled, heat treated and pickled. We offer also semi-cold rolled 1/2E surface finish RAP®2E that is a relatively rough shot-blasted finish with cold band tolerances and less roughness than a 1/1D finish. RAP®2E is available in austenitic and ferritic grades.

Grades, dimensions and services

METRIC DIMENSIONS
Surface finish Thickness (mm) Width (mm)
1D – Hot rolled, heat treated, pickled 2.4 – 12.7 max. 2032
 
IMPERIAL DIMENSIONS – PRODUCTS AVAILABLE FROM OUTOKUMPU AMERICAS
Surface finish Thickness (in) Width (in)
1 – Hot rolled, heat treated, pickled .1000 – .3750 max. 72

 

The availability of surface finishes and dimensions depends on the steel grade. Check Outokumpu Steel Finder for more specific information.

This is Outokumpu standard dimensions, other dimensions are available on request. Please contact Outokumpu sales to discuss your needs.

Do you need a stainless steel that is produced in Americas? View Outokumpu product offering in Calvert, AL and in Mexinox

Storage tank calculator: Calculate material consumption with your specifications

Pressure vessel calculator: Use this tool to compare how steel grade selection affects the wall thickness in a pressure vessel’s cylindrical shell

Moda 430/4016 stainless steel

Moda 430/4016 is a classic 16 % chromium ferritic stainless steel used in mildly corrosive environments.

EN 1.4016

ASTM type 430

ASTM UNS S43000

Microstructure Ferritic

Typical applications

  • Kitchen equipment
  • Household appliances
  • Sinks
  • Flanges and valves

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.05

Cr 16.2

Ni -

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Moda 439/4510 stainless steel

A titanium-stabilized 17% chromium ferritic steel with improved corrosion resistance, formability, and weldability compared to Moda 430/4016.

EN 1.4510

ASTM type 439

ASTM UNS S43035

Microstructure Ferritic

Typical applications

  • Automotive exhaust systems
  • Sugar industry equipment
  • Household appliances

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 17.1

Ni -

Mo -

N -

Others Ti

Please remove item from comparison before you can add another one

Moda 430Ti/4520 stainless steel

Moda 430Ti/4520 is an alternative to Moda 430/4016 with better formability and weldability for stamping, drawability applications, and complex shapes.

EN 1.4520

ASTM type 430Ti

ASTM UNS -

Microstructure Ferritic

Typical applications

  • Counter tops
  • Flue induction connectors
  • Automotive applications

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 16.2

Ni -

Mo -

N -

Others Ti

Please remove item from comparison before you can add another one

Moda 4589 stainless steel

Moda 4589 is a 14 % chromium product with a small amount of niobium for elevated strength, making it suitable for structural parts exposed to loads that demand higher yield points.

EN 1.4589

ASTM type -

ASTM UNS S42035

Microstructure Ferritic

Typical applications

  • Conveyor chains 
  • Railroad cars

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.05

Cr 14.0

Ni 1.7

Mo 0.3

N -

Others

Ti

 

Please remove item from comparison before you can add another one

Moda 410L/4003 stainless steel

Moda 410L/4003 is a weldable ferritic stainless steel with elevated yield strength and resistance to abrasion. Its better corrosion resistance compared to carbon steels enables lower maintenance costs and longer service life.

EN 1.4003

ASTM type 410L

ASTM UNS S40977

Microstructure Ferritic

Typical applications

  • Railroad and road vehicles
  • Shipping containers
  • Industrial applications
  • Mining conveyors

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 11.5

Ni 0.5

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Moda 409/4512 stainless steel

Moda 409/4512 is a weldable ferritic stainless steel with good oxidation resistance in dry air. It is also available as low-carbon Moda 409L.

EN 1.4512

ASTM type 409

ASTM UNS -

Microstructure Ferritic

Typical applications

  • Automotive applications
  • Industrial exhaust systems

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 11.5

Ni 0,2

Mo -

N -

Others Ti

Please remove item from comparison before you can add another one

Moda 410S-4000 stainless steel

Moda 410S/4000 is a 13% chromium general-purpose stainless steel that is used widely where corrosion is not severe. When supplied in the age hardened condition Moda 410S/4000 can be used where moderate corrosion and higher strength is required, while retaining its machinability.

EN 1.4000

ASTM type 410S

ASTM UNS S41008

Microstructure Ferritic

Typical applications

  • Bearings
  • Bushings
  • Dies
  • Fasteners
  • Pump shafts
  • Valves and valve components

Datasheet

Download Moda range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.03

Cr 12.5

Ni -

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Core 304/4301

Core 304/4301 is a classic 18% chromium, 8% nickel austenitic stainless steel. It’s an all-purpose product with good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Core 304/4301 can be delivered with a variety of surface finishes.

EN 1.4301

ASTM type 304

ASTM UNS S30400

Microstructure Austenitic

Typical applications

  • Household appliances and consumer goods
  • Kitchen equipment
  • Indoor and outdoor cladding, handrails and window frames
  • Food and beverage industry equipment
  • Storage tanks
  • Flanges and valves

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.04

Cr 18.1

Ni 8.1

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Core 304L/4307

Core 304L/4307 is a low-carbon alternative to Core 304/4301. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion. Core 304L/4307 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.

EN 1.4307

ASTM type 304L

ASTM UNS S30403

Microstructure Austenitic

Typical applications

  • Food and beverage industry equipment
  • Chemical and pharmaceutical industry equipment (mild to medium corrosive environments)
  • Heat exchangers
  • Storage tanks
  • Tank containers
  • Pipes and tubes
  • Flanges and valves

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition,% by mass

C 0.02

Cr 18.1

Ni 8.1

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Core 304LN/4311

A low-carbon, higher nickel and nitrogen alloyed alternative to Core 304L/4307 with improved strength and low-temperature toughness. Suitable for applications that require high tensile strength.

EN 1.4311

ASTM type 304L

ASTM UNS S30453

Microstructure Austenitic

Typical applications

  • Railroad cars
  • Pressure vessels
  • Chemical plant equipment (mild to medium corrosive environments)
  • Flanges and valves

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.02

Cr 18.5

Ni 9.2

Mo -

N 0.14

Others -

Please remove item from comparison before you can add another one

Core 304L/4306

A higher nickel alternative to Core 304L/4307 with improved formability and deep drawability.

EN 1.4306

ASTM type 304L

ASTM UNS S30403

Microstructure Austenitic

Typical applications

  • Chemical and pharmaceutical plant equipment (mild to medium corrosive environments)
  • Flanges and valves

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.02

Cr 18.2

Ni 10.1

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Core 305/4303

A high-nickel alternative to Core 304/4301 with reduced strain hardening and excellent cold-forming properties. Ideal for parts that require high degree of deformation. 

EN 1.4303

ASTM type 305

ASTM UNS S30500

Microstructure Austenitic

Typical applications

  • Industrial parts with complex shapes
  • Sinks and other deep-drawn products
  • Complex stamping processes
  • Re-rollers producing very thin-gauge coils

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.04

Cr 17.7

Ni 12.5

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Core 321/4541

A titanium-stabilized austenitic stainless steel with improved intergranular corrosion resistance for an extended temperature range.

EN 1.4541

ASTM type 321

ASTM UNS S32100

Microstructure Austenitic

Typical applications

  • Anneailing covers
  • Stack liners
  • Automotive exhaust systems
  • Welded pressure vessels
  • Flanges and valves

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composotion, % by mass

C 0.04

Cr 17.3

Ni 9.1

Mo -

N -

Others Ti

Please remove item from comparison before you can add another one

Core 347/4550

Core 347/4550 is a niobium stabilized alternative to Core 321/4541 with improved intergranular corrosion resistance and good mechanical properties at high temperatures. Core 347/4550 is particularly useful in applications with intermittent heating in the range 400–900 °C/750–1650 °F.

EN 1.4550

ASTM type 347

ASTM UNS S34700

Microstructure Austenitic

Typical applications

  • High temperature gaskets
  • Rocket engine parts
  • Expansion joints
  • Aircraft collector rings
  • Exhaust manifolds
  • Chemical production equipment
  • Flanges and valves

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.05

Cr 17.5

Ni

9.5

Mo -

N -

Others Nb

Please remove item from comparison before you can add another one

Core 301LN/4318

A low-carbon, nitrogen alloyed alternative to Core 301/4310 with elevated strength, making it particularly suitable for lightweight construction.

EN 1.4318

ASTM type 301LN

ASTM UNS S30153

Microstructure Austenitic

Typical applications

• Automotive applications, especially vehicles chassis
• Railroad cars

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.02

Cr 17.7

Ni 6.5

Mo -

N 0.14

Others -

Please remove item from comparison before you can add another one

Core 301/4310

A lower chromium and nickel alternative to Core 304/4301 with high work hardening capacity, this is a good choice for applications subjected to high mechanical loading

EN 1.4310

ASTM type 301

ASTM UNS S30100

Microstructure Austenitic

Typical applications

  • Springs
  • Press plates
  • Conveyor chains
  • Mixer blades
  • Sinks

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, by mass %

C 0.10

Cr 17.0

Ni 7.0

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Core 441/4509

A nickel-free 17% chromium ferritic stainless steel grade with good corrosion resistance and high-temperature strength was originally designed for exhaust systems. Core 441/4509 is available with single (niobium) or dual (niobium and titanium) stabilization. Due to good formability and weldability it is often a suitable replacement for Core 301/4310.

EN 1.4509

ASTM type -

ASTM UNS S43940

Microstructure Ferritic

Usage

  • Indoor claddings
  • Restaurant equipment and appliances
  • Tubes
  • Heat exchangers

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.02

Cr 17.6

Ni -

Mo -

N

-

 

Others Nb, Ti 

Please remove item from comparison before you can add another one

Core 439M

Very similar to Core 441/4509, but dual stabilized with titanium and niobium for a more even surface appearance and enhanced weldability. With 1% more chromium, it also has slightly better corrosion resistance.

EN -

ASTM type 439M

ASTM UNS S43932

Microstructure Ferritic

Typical applications

  • Automotive exhaust systems
  • Sugar industry equipment
  • Household appliances

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.02

Cr 17.6

Ni -

Mo -

N -

Others Ti,Nb

Please remove item from comparison before you can add another one

Core 4622

A nickel-free, high-chromium (21Cr) ferritic stainless steel with equal corrosion resistance to Core 304/4301. Core 4622 has excellent deep drawability and is almost ridging free, meaning it is easier to polish and has a lower overall production cost.

EN 1.4622

ASTM type -

ASTM UNS S44330

Microstructure Ferritic

Typical applications

  • Household, catering and architectural applications (indoor and outdoor)
  • Tubular products for automotive and process industries
  • Building facades
  • Tanks and process equipment

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.02

Cr 21.0

Ni -

Mo -

N -

Others Nb,Ti,Cu

Please remove item from comparison before you can add another one

Core 434/4113

A molybdenum-alloyed ferritic stainless steel that offers improved corrosion resistance. This grade is available from Outokumpu Americas.

EN 1.4113

ASTM type 434

ASTM UNS S43400

Microstructure Ferritic

Typical applications

  • Automotive trim and fittings

Datasheet

Download Core range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.04

Cr 16.5

Ni -

Mo 1.0

N -

Others -

Please remove item from comparison before you can add another one

Supra 316/4401 stainless steel

Supra 316/4401 is a widely used Molybdenum alloyed austenitic stainless steel. It’s an all-purpose product with very good corrosion resistance and is suitable for a wide variety of applications that require good formability and weldability. Supra 316/4401 can be delivered with a variety of surface finishes.

EN 1.4401

ASTM type 316

ASTM UNS S31600

Microstructure Austenitic

Typical applications

  • Heat exchangers
  • Flanges and valves

Datasheet

Outokumpu Supra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication.

Chemical composition

C 0.04

Cr 17.2

Ni 10.1

Mo 2.1

N -

Others -

Please remove item from comparison before you can add another one

Supra 316L/4404 stainless steel

Supra 316L/4404 is a low-carbon alternative to Supra 316/4401. The lower carbon content minimizes carbide precipitation as a result of heat input, for example during welding, giving improved resistance against intergranular corrosion.Supra 316L/4404 is suitable for a wide variety of applications that require good formability and weldability, and can be delivered with a variety of surface finishes.

EN 1.4404

ASTM type 316L

ASTM UNS S31603

Microstructure Austenitic

Typical applications

  • Chemical industry
  • Petrochemical industry
  • Pulp and paper industry
  • Textile industry
  • Food and beverage industry
  • Pharmaceutical industry
  • Medical applications
  • Flanges and valves

Datasheet

Download Supra range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 17.2

Ni 10.1

Mo 2.1

N -

Others -

Please remove item from comparison before you can add another one

Supra 316plus stainless steel

Supra 316plus is the highest strength stainless steel in the Supra range. It is a cost-efficient, 21Cr lower-nickel/molybdenum alternative to traditional molybdenum austenitics like Supra 316L. This product has good formability, excellent weldability, and is usable in cryogenic applications.

EN 1.4420

ASTM type -

ASTM UNS S31655

Microstructure Austenitic

Typical applications

  • Process and transport tanks
  • Water treatment and pipes
  • Heat exchangers
  • Architectural applications

Datasheet

Download Supra range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.02

Cr 20.3

Ni 8.6

Mo 0.7

N 0.19

Others -

Please remove item from comparison before you can add another one

Supra 316/4436 stainless steel

Supra 316/4436 is a product with high resistance to non-oxidizing acids and chloride-containing media due to higher molybdenum content. It has good formability and weldability.

EN 1.4436

ASTM type 316

ASTM UNS S31600

Microstructure Austenitic

Typical applications

  • Pulp and paper industry equipment
  • Pharmaceutical industry equipment
  • Flanges and valves

Datasheet

Download Supra range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.04

Cr 16.9

Ni 10.7

Mo 2.6

N -

Others -

Please remove item from comparison before you can add another one

Supra 316L/4435 stainless steel

Supra 316L/4435 is a alternative to 316L/4404 with higher molybdenum and nickel content for enhanced corrosion resistance and formability.

EN 1.4435

ASTM type 316L

ASTM UNS S31603

Microstructure Austenitic

Typical applications

  • Urea plants
  • Pulp and synthetic fiber plants
  • Flanges and valves

Datasheet

Download Supra range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C

0.02

 

Cr 17.3

Ni 12.6

Mo 2.6

N -

Others -

Please remove item from comparison before you can add another one

Supra 316Ti/4571 stainless steel

Supra 316Ti/4571 is a titanium-stabilized alternative to Supra 316L/4404 – mainly used in Germany for elevated temperature applications. Due to its titanium-stabilization this product is weldable in all thickness ranges.

EN 1.4571

ASTM type 316Ti

ASTM UNS S31635

Microstructure Austenitic

Usage

  • Flue gas applications
  • Flanges and valves

Datasheet

Download Supra range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Chemical composition

C 0.04

Cr 16.8

Ni 10.9

Mo 2.1

N -

Others Ti

Please remove item from comparison before you can add another one

Forta LDX 2101

A lean-alloyed duplex product with good resistance to localized and uniform corrosion, as well as stress corrosion cracking, making it a good substitute for coated carbon steel in e.g. structural components and storage tanks. Also offers high mechanical strength and good machinability.

EN 1.4162

ASTM type -

ASTM UNS S32101

Microstructure Duplex

Typical applications

  • Storage tanks
  • Household heaters
  • Structural components for floodgates and bridges, or rebar for concrete structures
  • Pulp and paper industry applications such as digesters and components for paper machines
  • Flanges and valves

Datasheet

Download Forta range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication.

Chemical composition, % by mass

C 0.03

Cr 21.5

Ni 1.5

Mo 0.3

N 0.22

Others 5 Mn Cu

Please remove item from comparison before you can add another one

Forta DX 2304

A duplex product with a leaner alloying composition than Forta DX 2205. It has good resistance to localized and uniform corrosion, as well as stress corrosion cracking, combined with high mechanical strength.

EN 1.4362

ASTM type -

ASTM UNS S32304

Microstructure Duplex

Typical applications

  • Pulp and paper industry applications
  • Blast walls on oil platforms
  • Flanges and valves

Datasheet

Download Forta range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication.

Chemical composition, % by mass

C 0.02

Cr 23.0

Ni 4.8

Mo 0.3

N 0.10

Others Cu

Please remove item from comparison before you can add another one

Forta EDX 2304

An enhanced version of Forta DX 2304 with better corrosion resistance and higher mechanical strength.

EN 1.4362

ASTM type -

ASTM UNS S32304

Microstructure Duplex

Typical applications

  • Offshore topside structural components
  • Tank applications
  • Flanges and valves

Datasheet

Download Forta range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C

0.02

Cr 23.8

Ni 4.3

Mo 0.5

N 0.18

Others Cu

Please remove item from comparison before you can add another one

Forta SDX 2507

A super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely corrosive environments such as desalination, chemical, or offshore subsea applications.

EN 1.4410

ASTM type -

ASTM UNS S32750

Microstructure Duplex

Typical applications

  • Desalination plants
  • Industrial piping
  • Scrubbers
  • Tubular products for oil and gas applications
  • Deep-sea pipelines
  • Flanges and valves

Datasheet

Download Forta range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.02

Cr 25

Ni 7.0

Mo 4.0

N 0.27

Others -

Please remove item from comparison before you can add another one

Forta H400

Forta H400 has higher strength than standard 304/4301 and a lower nickel content, making it a cost-effective and lightweight austenitic product for the automotive industry. It has been used in automotive applications for over 10 years.

EN 1.4376

ASTM type -

ASTM UNS -

Microstructure Austenitic

Usage

  • Cross members
  • Strut domes
  • Bumpers

Datasheet

Download Forta range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.04

Cr 17.5

Ni 4.0

Mo -

N 0.20

Others 6.8Mn

Please remove item from comparison before you can add another one

Ultra 317L stainless steel

Ultra 317L is a molybdenum-alloyed austenitic stainless steel with higher corrosion resistance than Supra 316L/4404 – mainly used in the USA and Asia.

EN 1.4438

ASTM type

317L

 

ASTM UNS S31703

Microstructure Austenitic

Typical applications

  • Chemical processing industry

Data sheet

Dowload Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.02

Cr 18.2

Ni 13.7

Mo 3.1

N -

Others -

Please remove item from comparison before you can add another one

Ultra 6XN stainless steel

Ultra 6XN is a 6 % molybdenum, high-nickel and nitrogen-alloyed austenitic product with extremely high resistance to both uniform and localized corrosion.

EN 1.4529

ASTM type -

ASTM UNS N08926/N08367

Microstructure Austenitic

Typical applications

  • Applications requiring resistance to chlorinated seawater
  • Flue gas cleaning

Datasheet

Download Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.01

Cr 20.5

Ni 24.8

Mo 6.5

N 0.20

Others Cu

Please remove item from comparison before you can add another one

Ultra 904L stainless steel

Ultra 904L is a high-nickel and molybdenum austenitic stainless steel with very high corrosion resistance. It was originally developed for handling sulfuric acid at ambient temperatures, and is now used in a broad range of chemical industry applications.

EN 1.4539

ASTM type 904L

ASTM UNS NO8904

Microstructure Austenitic

Typical applications

  • Chemical and petrochemical industry equipment such as pipes, heat exchangers, tanks, and reactor vessels
  • Sulfuric acid handling
  • Flanges and valves

Datasheet

Download Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.01

Cr 19.8

Ni 24.2

Mo 4.3

N -

Others 1.4Cu

Please remove item from comparison before you can add another one

Ultra 254 SMO stainless steel

A 6 % molybdenum and nitrogen-alloyed austenitic stainless steel with extremely high resistance to both uniform and localized corrosion. This product was developed especially for oil and gas offshore platforms and the pulp and paper industry.

EN 1.4547

ASTM type -

ASTM UNS S31254

Microstructure Austenitic

Typical applications

  • Applications requiring resistance to chlorinated seawater
  • Flue gas cleaning
  • Maritime exhaust gas cleaning (EGC)
  • Bleaching equipment in the pulp and paper industry
  • Flanges and valves

Datasheet

Download Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.01

Cr 20.0

Ni 18.0

Mo 6.1

N 0.20

Others Cu

Please remove item from comparison before you can add another one

Ultra 654 SMO stainless steel

Ultra 654 SMO is the most corrosion-resistant stainless steel in the world. A 7 % molybdenum, very high nitrogen alloyed austenitic product with high mechanical strength. A potentially lean alternative to traditional wet-corrosion resistant nickel-based alloys.

EN 1.4652

ASTM type -

ASTM UNS S32654

Microstructure Austenitic

Typical applications

  • Pressurized and erosive systems handling chlorinated seawater at higher temperatures
  • Plate heat exchangers
  • Flue gas cleaning applications

Typical chemical composition, % by mass

C 0.01

Cr 24.0

Ni 22.0

Mo 7.3

N 0.50

Others 3.5Mn Cu

Please remove item from comparison before you can add another one

Ultra 4565 stainless steel

A 4.5% molybdenum, very high nitrogen alloyed austenitic stainless steel with excellent corrosion resistance and high mechanical strength.

EN 1.4565

ASTM type -

ASTM UNS S34565

Microstructure Austenitic

Typical applications

  • Flue gas desulfurization applications

Data sheet

Download Ultra range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.02

Cr 24.0

Ni 17.0

Mo 4.5

N 0.45

Others 5.5Mn

Please remove item from comparison before you can add another one

Dura 4024

A martensitic stainless steel with slightly better hardenability than Dura 410/4006 that is corrosion resistant in water and steam. 

EN 1.4024

ASTM type -

ASTM UNS -

Microstructure Martensitic

Typical applications

  • Mechanical engineering applications
  • Surgical instruments

Typical chemical composition, % by mass

C 0.16

Cr 13.2

Ni -

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Dura 420/4021

A very popular martensitic stainless steel that is corrosion resistant in water and steam. 

EN 1.4021

ASTM type 420

ASTM UNS S42000

Microstructure Martensitic

Typical applications

  • Cutting utensils
  • Surgical instruments
  • Press plates
  • Brake discs
  • Mechanical parts
  • Flanges and valves

Datasheet

Download Dura range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.20

Cr 13.0

Ni -

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Dura 420/4028

A martensitic stainless steel that is corrosion resistant in water and steam. 

EN 1.4028

ASTM type 420

ASTM UNS S42000

Microstructure Martensitic

Typical applications

  • Cutting utensils
  • Surgical instruments
  • Measuring tools
  • Flanges and valves
  • Wear-resistant mechanical parts

Datasheet

Download Dura range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.30

Cr 12.5

Ni -

Mo -

N -

Please remove item from comparison before you can add another one

Dura 420/4031

A martensitic stainless steel with medium-high hardness that is corrosion resistant in water and steam. 

EN 1.4031

ASTM type 420

ASTM UNS S42000

Microstructure Martensitic

Typical applications

  • Cutting utensils
  • Surgical instruments
  • Measuring tools
  • Wear-resistant mechanical parts 

Datasheet

Download Dura range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.38

Cr 13.5

Ni -

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Dura 420/4034

A high-hardness martensitic stainless steel that is corrosion resistant in water and steam. 

EN 1.4034

ASTM type 420

ASTM UNS S42000

Microstructure Martensitic

Typical applications

  • Professional kitchen knives
  • Surgical instruments
  • Press plates
  • Brake discs

Datasheet

Download Dura range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.45

Cr 13.7

Ni -

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Dura 4419Mo

Similar to Dura 420/4028, but with improved corrosion resistance and high-temperature strength.

EN 1.4419

ASTM type -

ASTM UNS -

Microstructure Martensitic

Typical applications

  • Mechanical engineering applications

Datasheet

Download Dura range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.38

Cr 13.3

Ni -

Mo 0.9

N -

Others -

Please remove item from comparison before you can add another one

Dura 4122

Outokumpu’s most corrosion-resistant martensitic stainless steel. Good resistance in moderately corrosive, low-chloride environments and very good mechanical properties and wear resistance. Medium-high hardness. 

EN 1.4122

ASTM type -

ASTM UNS -

Microstructure Martensitic

Typical applications

  • Surgical instruments
  • Food processing equipment
  • Mechanical parts
  • Machine and pump construction

Datasheet

Download Dura range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.41

Cr 16.1

Ni -

Mo 1.0

N -

Others -

Please remove item from comparison before you can add another one

Dura 4110

A high-hardness martensitic stainless steel with improved corrosion and wear resistance compared to Dura 420/4034. 

EN 1.4410

ASTM type -

ASTM UNS -

Microstructure Martensitic

Typical applications

  • Knife blades
  • Scissors
  • Surgical cutting tools
  • Measuring tools
  • Pump construction
  • Valves

Datasheet

Download Dura range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.50

Cr 14.8

Ni -

Mo 0.8

N -

Others -

Please remove item from comparison before you can add another one

Dura 4116

Similar to Dura 4110 but with elevated wear resistance.

EN 1.4116

ASTM type -

ASTM UNS -

Microstructure Martensitic

Typical applications

  • Cutting instruments that undergo partial hardening

Datasheet

Download Dura range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.50

Cr 14.4

Ni -

Mo 0.6

N -

Others -

Please remove item from comparison before you can add another one

Therma 253 MA stainless steel

Therma 253 MA is an austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1150°C/2100°F. There is a slight susceptibility to embrittlement during continuous operation between 600–850°C/1110–1560°F.

EN 1.4835

ASTM type -

ASTM UNS S30815

Microstructure Austenitic

Typical applications

  • Oil industry equipment
  • Conveyor belts
  • Refractory anchors
  • Expansion bellows
  • Radiant tubes
  • Rotary kilns
  • Exhaust manifolds
  • Power generation applications
  • Cyclone dip tubes
  • Impact separators
  • Bell furnaces
  • Muffle furnaces
  • Automotive exhaust components
  • Tube shields
  • Heat treatment trays
  • Dampers
  • Recuperator tubes
  • Large-scale bakery ovens
  • Valves and flanges

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.09

Cr 21.0

Ni 11.0

Mo -

N 0.17

Others Si, Ce

Please remove item from comparison before you can add another one

Therma 310S/4845 stainless steel

Therma 310S/4865 is an austenitic product with very good oxidation resistance in general and good oxidation resistance in mildly cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. There is a slight susceptibility to embrittlement during continuous operation between 600–900°C/1110–1652°F.

EN 1.4845

ASTM type 310S

ASTM UNS S31800

Microstructure Austenitic

Typical applications

  • Furnace equipment
  • Oil industry equipment
  • Heat treatment baskets
  • Heat exchangers
  • Steam boilers
  • Thermowells
  • Automotive components
  • Valves and flanges

Typical chemical composition, % by mass

C 0.05

Cr 25.5

Ni 19.1

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Therma 4713 stainless steel

Therma 4713 is a ferritic low-alloyed stainless steel best employed at 550–800 °C/1020– 1470 °F when you need higher mechanical loading compared to other ferritic grades. Offers good resistance against sulfur attack compared to nickel-alloyed grades.

EN 1.4713

ASTM type -

ASTM UNS -

Microstructure Ferritic

Typical applications

  • Furnace equipment
  • Air heaters
  • Annealing boxes
  • Conveyor belts
  • Thermowells

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.06

Cr 6.5

Ni -

Mo -

N -

Others Al, Si 

Please remove item from comparison before you can add another one

Therma 4724 stainless steel

Therma 4724 is a ferritic low-alloyed product with improved oxidation resistance in temperatures up to 850°C/1560°F.

EN 1.4724

ASTM type -

ASTM UNS -

Microstructure Ferritic

Typical applications

  • Furnace equipment
  • Thermal boiler components
  • Grids
  • Burner nozzles
  • Conveyor belts
  • Thermowells

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.07

Cr 12.5

Ni -

Mo -

N -

Others Al, Si

Please remove item from comparison before you can add another one

Therma 4742 stainless steel

Therma 4742 is a ferritic stainless steel with very good oxidation resistance in temperatures up to 1000 °C/1830 °F, but which begins to be subject to embrittlement at temperatures above 950°C/1740°F.

EN 1.4742

ASTM type -

ASTM UNS -

Microstructure Ferritic

Typical applications

  • Grids
  • Burner nozzles
  • Conveyor belts
  • Chains
  • Machine parts
  • Cement processing equipment

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.07

Cr 17.5

Ni -

Mo -

N -

Others Al, Si 

Please remove item from comparison before you can add another one

Therma 153 MA stainless steel

Therma 153 MA is an austenitic stainless steel with excellent oxidation and creep resistance in cyclic conditions that is best employed in temperatures up to 1050°C/1920°F. This product has an excellent resistance to embrittlement.

EN 1.4818

ASTM type -

ASTM UNS S30415

Microstructure Austenitic

Typical applications

  • Recuperators
  • Conveyor belts
  • Expansion bellows
  • Power generation applications
  • Cyclone dip tubes
  • Bell furnaces
  • Muffle furnaces
  • Automotive components
  • Tube shields
  • Heat treatment trays
  • Dampers
  • Valves and flanges

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.05

Cr 18.5

Ni 9.1

Mo -

N 0.15

Others Si,Ce

Please remove item from comparison before you can add another one

Therma 4828 stainless steel

Therma 4828 is an austenitic heat resisting stainless steel with improved oxidation resistance in temperatures up to 1000°C/1830°F. There is a slight susceptibility to embrittlement during continuous operation atbetween 600–850°C/1110– 1560 °F.

EN 1.4828

ASTM type -

ASTM UNS -

Microstructure Austenitic

Typical applcations

  • Furnace equipment (especially supporting parts)
  • Annealing and hardening boxes
  • Air heaters
  • Exhaust systems
  • Automotive components such as turbochargers
  • Valves and flanges

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.05

Cr 19.3

Ni 11.2

Mo -

N -

Others Si

Please remove item from comparison before you can add another one

Therma 309S/4833 stainless steel

Therma 309S/4833 is an austenitic stainless steel with improved oxidation resistance in temperatures up to 1000°C/1830°F. There is a slight susceptibility to embrittlement during continuous operation at 600–900°C/1110–1652°F.

EN 1.4833

ASTM type 309S

ASTM UNS S30908

Microstructure Austenitic

Typical applications

  • Furnace equipment
  • Annealing boxes
  • Thermowells
  • Baffle plates
  • Pots for quenching salt
  • Valves and flanges

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.06

Cr 22.3

Ni 12.3

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Therma 314/4841 stainless steel

Therma 314/4841 is an austenitic heat resisting stainless steel with excellent oxidation resistance in temperatures up to 1150°C/2100°F. There is a high susceptibility to embrittlement during continuous operation at 600–900°C/1110–1652°F

EN 1.4841

ASTM type 314

ASTM UNS S31400

Microstructure Austenitic

Typical applications

  • Furnace equipment
  • Superheater suspensions
  • Enameling grates and hardening boxes
  • Valves and flanges

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.06

Cr 24.3

Ni 19.2

Mo -

N -

Others Si

Please remove item from comparison before you can add another one

Therma 321H/4878 stainless steel

Therma 321H/4878 is an austenitic heat resisting stainless steel with comparable wet corrosion resistance to Core 321/4541 that is best employed in temperatures up to 850 °C/1560 °F.

EN 1.4878

ASTM type 321H

ASTM UNS -

Microstructure Austenitic

Typical applications

  • Furnace equipment
  • Case hardening boxes
  • Valves and flanges

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.05

Cr 17.3

Ni 9.1

Mo -

N -

Others Ti 

Please remove item from comparison before you can add another one

Therma 304H/4948 stainless steel

Therma 304H/4948 is an austenitic Core 304/4301 variant with improved high-temperature creep strength that is best employed in temperatures up to 750°C/1380°F. It offers good formability and weldability.

EN 1.4948

ASTM type 304H

ASTM UNS S30409

Microstructure Austenitic

Typical applications

  • Tubes
  • Pressure vessels
  • Valves and flanges

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechnanical properties, physical properties and fabrication

Typical chemical composition, % by mass

C 0.05

Cr 18.1

Ni 8.3

Mo -

N -

Others -

Please remove item from comparison before you can add another one

Therma 347H stainless steel

Therma 347H is an austenitic heat resisting stainless steel with excellent long-term creep resistance at at 550–600°C/1020–1110°F and comparable wet corrosion resistance to Core 347/4550.

EN -

ASTM type 347H

ASTM UNS S34709

Microstructure Austenitic

Typical applications

  • Oil refineries
  • Fired heater tubes
  • Boiler casings
  • Pressure vessels
  • Reactor vessels
  • Welded tubes
  • Fittings
  • Stack liners
  • Tanks for storing organic chemicals
  • Furnace heating elements
  • Tanks for thermal storage
  • Valves and flanges

Datasheet

Download Therma range datasheet for more information on corrosion resistance, mechanical properties, physical properties and fabrication.

Typical chemical composition, % by mass

C 0.05

Cr 17.5

Ni 9.5

Mo -

N -

Others Nb

Please remove item from comparison before you can add another one

Outokumpu is the leading supplier of stainless steel sheets and plates in Europe. Through our global network of plate service centres, we are equipped with state of the art machinery, and offer our customers a variety of processing solutions: bending, laser cutting, machining, plasma cutting, sawing, waterjet cutting and welding. In addition to our global network, we can offer a selection of additional services – such as grinding and leveling – through our extensive network of expert partners.

With extensive stock, and vast grade ranges, the Outokumpu plate service centers are the leading stainless profiling network that are located in China, Finland, France, Germany, Italy, the Netherlands, Sweden and the UK.

Our plate service centers are an important link in ensuring that the customer gets stainless steel formed and finished to precise requirements.

We offer our customers a total solution, from research and development, melting, rolling, tailor-made plates and cut components. Outokumpu handles the process from the mill right through to the final bespoke item delivered to the customer. This means logistical advantages, quality assurance, delivery reliability and cost savings for our customers, as well as total responsibility from the melt to the market.

 

SERVICES*
ABRASIVE WATER JET CUTTING
  Maximum width Maximum length Maximum thickness
  4,100 mm 13,200 mm 150 mm
LASER EN ISO 9013 (Din 2310 (5)-IIL)
  Maximum width Maximum length Maximum thickness
4 kW 2.500 mm 6.500 mm 15 mm
6 kW 2.000 mm 6.000 mm 25 mm
SAWING
  Maximum width Maximum length Maximum thickness
  2,500 mm 6,250 mm 300 mm
PLASMA EN ISO 9013 (Din 2310)
  Maximum width Maximum length Maximum thickness
Under water 6,500 mm 16,000 mm 70 mm
Dry to 6,500 mm 18,000 mm 150 mm
Possibility of welding edge preparation
LEVELER
  Maximum width Maximum length Maximum thickness
  1,450 mm 2,000 mm 35 mm
Other dimensions on request.
MACHINING Turning/drilling/milling
  Maximum width    
  1,450 mm    
Other dimensions on request.
 
SHEAR      
    Maximum length  
2 to 35 mm   6,500 mm  
BENDING 2.300 ton      
    Maximum length  
    13,000 mm  
PLASMA AND SUBMERGED ARC WELDING (SAW)
    Maximum length  
Profiles, pipes, submerged arc welding   13,500 mm  
IN COOPERATION WITH OUR ROLLING MILL
Welding edge preparation
Milling 30/45/50
     
Grinding    
* All data depending on dimensions and drawing

Cases

Case Sodertalje bridge

Bridging the way to a more sustainable and economical future

Article

Stainless steel stacks up for fuel cell bipolar plates

Article

Six key facts about stainless steel in commercial kitchens

Case DA Christie barbeques

Stainless steel central to the success of Australian public barbecues

Case Metalis waste bins

Rotterdam wastes no opportunity for sustainability

Case Temoco

Adding a sustainable touch to the Nordic’s leading bars

Case Imminkhuizen Metaaltechniek

Faster, more automated production is the future

Case Astava Instrumentation Solutions

High machinability delivers competitive edge

Case Rotoko machining operations

Where high machinability and superior quality meet

Interested in the world of stainless steel? 

Keep up to date with our monthly newsletter providing you with the latest news, articles, webinars and insights.

Subscribe